stone

Back to Marmomac show… Finally!
Bovone Diamond Tools will be at next edition of Marmomac 2022, waiting to see you in Verona from 27th to 30th September.
HALL 5 | BOOTH E5

For more information do not hesitate to contact us.

Request Information

    REQUEST INFORMATION

    I authorise the processing of my personal data. I hereby authorize the use of my personal details solely for circulation within the company in relation to the Italian Legislative Decree n° 196/2003. I authorise the processing of my personal information under D.Lgs. 196/03.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


    glass

    We will be there… See you at glasstec Show!
    Bovone Diamond Tools will be at next edition of glasstec, waiting to see you in Düsseldorf, Germany from 20th to 23rd September 2022.
    HALL 16 | BOOTH C57

    For more information do not hesitate to contact us.

    Request Information

      REQUEST INFORMATION

      I authorise the processing of my personal data. I hereby authorize the use of my personal details solely for circulation within the company in relation to the Italian Legislative Decree n° 196/2003. I authorise the processing of my personal information under D.Lgs. 196/03.

      This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


      glass

      We will be there… See you at Vitrum Show!
      Bovone Diamond Tools will be at next edition of VITRUM, waiting to see you in Milan from 5th to 8th October 2021.
      HALL 24 | BOOTH F21-G22

      Click here to register
      Click here to download registration guideline

      For more information do not hesitate to contact us.

      Request Information

        REQUEST INFORMATION

        I authorise the processing of my personal data. I hereby authorize the use of my personal details solely for circulation within the company in relation to the Italian Legislative Decree n° 196/2003. I authorise the processing of my personal information under D.Lgs. 196/03.

        This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


        stone

        Back to Marmomac show… Finally!
        Bovone Diamond Tools will be at next edition of Marmomac 2021, waiting to see you in Verona from 29th September to 2nd October.
        PAD H2 | STAND D3

        Click here to get a free pass.

        For more information do not hesitate to contact us.

        Request Information

          REQUEST INFORMATION

          I authorise the processing of my personal data. I hereby authorize the use of my personal details solely for circulation within the company in relation to the Italian Legislative Decree n° 196/2003. I authorise the processing of my personal information under D.Lgs. 196/03.

          This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


          mole-AVWe have tested new peripheral wheels for CNC machines for glass and Dekton processing with high performing features in terms of speed and quality results.

          “High speed wheels” is their name and the idea is to underline its special feature, that is to say working speed. The market is now requesting high quality, performing and faster tools and the advantage cannot only be the result, but also a save in time and an easier way of using it. The whole BDT staff has been working since some months to design a new range being able of satisfying all requests made by final users and distributors. And that’s what Bovone Diamond Tools decided to challenge…

          There are basically three types of wheels: flat edge wheels, trapezoidal wheels and routers.
          The particular feature of the flat profile wheels is the new design of the sectors, which are smaller and set more closely together; as a result, they can reach at speeds of 10 metres/minute, operating at 7,500 RPM.
          The trapezoidal wheels are made differently compared with traditional ones and have a different grit size. Accordingly, they can reach speeds of up to 8 metres/minute, again at 7,500 RPM.
          The new routers also feature the modified sector design and can reach speeds 50% or so higher than traditional ones, being estimated to operate at around 12,000 rpm. The wheels were tested on a new machining centre recently purchased to allow in-house testing of peripheral wheels, and thus represent the fruit of this important investment. The excellent results obtained with glass processing were repeated with Dekton, showing its very close relationship with glass.

          For more information do not hesitate to contact us.

          Request Information

            REQUEST INFORMATION

            I authorise the processing of my personal data. I hereby authorize the use of my personal details solely for circulation within the company in relation to the Italian Legislative Decree n° 196/2003. I authorise the processing of my personal information under D.Lgs. 196/03.

            This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


            new machines

            In 2019 we made new investments in machines to handle a big increase in production. These new investments had already started in 2018 and have gone on all over 2019. Even though 2017 featured a big boom of developing markets, that didn’t give us so many results after all, 2019 was stable as to confirm 2018 increase. We hope 2020 will be the same.

            Human resources, who had been recruited in 2018, were confirmed in 2019 and they totally joined the old employees with more than a consolidated experience in this field.

            Even in this case, synergy with Elettromeccanica Bovone is successful and is represented by the new Technical Manager Gianni Marenco. He has actually worked 30 years as machine installer and has developed a special concern in tooling. He joined BDT at the end of 2017 and his involvement is continuous and complete: from the one hand he supports people in production to keep on learning all secrets and on the other hand he deals with new projects, especially the Click-Fit and High Speed Tools for CNC machines.

            For more information do not hesitate to contact us.

            Request Information

              REQUEST INFORMATION

              I authorise the processing of my personal data. I hereby authorize the use of my personal details solely for circulation within the company in relation to the Italian Legislative Decree n° 196/2003. I authorise the processing of my personal information under D.Lgs. 196/03.

              This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


              Top Tags

                REQUEST INFORMATION

                I authorise the processing of my personal data. I hereby authorize the use of my personal details solely for circulation within the company in relation to the Italian Legislative Decree n° 196/2003. I authorise the processing of my personal information under D.Lgs. 196/03.

                This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.